Bridge Deck Finishers
BDF Specifications
| FEATURES | BDF4836B |
|---|---|
| OPERATOR'S CONSOLE ENGINE | Kohler® CH740 (725 cc) |
| HORSEPOWER CLASS | 23.5 HP (17.5 kW) |
| FUEL TYPE | Air Cooled Gasoline |
| PAVING CARRIAGE ENGINE | Kohler® CH740 (725 cc) |
| HORSEPOWER CLASS | 23.5 HP (17.5 kW) |
| FUEL TYPE | Air Cooled Gasoline |
| MAXIMUM WIDTH ***SEE NOTE BELOW*** | 90 ft (27.4 m) |
| PAVING ROLLERS | Dual 48 in (121.9 cm) |
| AUGERS | Dual 8 in (203 mm) Adjustable |
| TRUSS SECTION WIDTHS AVAILABLE | 2, 3, 4, 6, 12 and 15 ft |
| CUPPED BOGIES-DRIVER* | Two Bogie Frames - 36 in (91.4 cm) |
| CUPPED BOGIES-IDLE* | Two Bogie Frames - 36 in (91.4 cm) |
| LEG JACKS (WITH SOLID LEG PLATES)** | 48 in (123 cm) Vertical Adjustment |
| LEGS JACKS HEIGHT ADJUSTMENT**** | Manual - 6 in (15.2 cm) ****Powered Optional - 6 in (15.2 cm) |
*Other Bogie Wheel options available – Flat Flange Poly Coated & Poly Cupped
** Pivot Leg Plates -Suggested for 3 - 3.5% Cross-Slope & Required for Cross-Slope over 3.5%
*** Consult factory for Wider Widths – 6048BDF Will require Transition Truss Sections for lengths over 120’.
****Consult Product Support – Paving Sales for additional options and accessories available.
| FEATURES | BDF6048B |
|---|---|
| OPERATOR'S CONSOLE ENGINE | Kohler® CH740 (725 cc) |
| HORSEPOWER CLASS | 23.5 HP (17.5 kW) |
| FUEL TYPE | Air Cooled Gasoline |
| PAVING CARRIAGE ENGINE | Kohler® CH740 (725 cc) |
| HORSEPOWER CLASS | 23.5 HP (17.5 kW) |
| FUEL TYPE | Air Cooled Gasoline |
| MAXIMUM WIDTH ***SEE NOTE BELOW*** | 120 ft (36.5 m) |
| PAVING ROLLERS | Dual 60 in (152.3 cm) |
| AUGERS | Dual 8 in (203 mm) Adjustable |
| TRUSS SECTION WIDTHS AVAILABLE | 2, 3, 4, 6, 12 and 15 ft |
| CUPPED BOGIES-DRIVER* | Two Bogie Frames - 48 in (121.9 cm) |
| CUPPED BOGIES-IDLE* | Two Bogie Frames - 48 in (121.9 cm) |
| LEG JACKS (WITH SOLID LEG PLATES)** | 48 in (123 cm) Vertical Adjustment |
| LEGS JACKS HEIGHT ADJUSTMENT**** | Manual - 6 in (15.2 cm) |
*Other Bogie Wheel options available – Flat Flange Poly Coated & Poly Cupped
** Pivot Leg Plates -Suggested for 3 - 3.5% Cross-Slope & Required for Cross-Slope over 3.5%
*** Consult factory for Wider Widths – 6048BDF Will require Transition Truss Sections for lengths over 120’.
****Consult Product Support – Paving Sales for additional options and accessories available.